DoradoStrip 3032
Architectural / Janitorial Paint remover

Product Facts!  DoradoStrip 3032 can help save you money over nationally recognized name brand chemical paint removers by offering similar if not better performance characteristics at a lower overall cost per gallon.


Eldorado Solutions paint removersDoradoStrip 3032 is a low VOC, water-based biodegradable, low odor paint remover. DoradoStrip 3032 will effectively lift urethanes, and alkyds from vinyl tiles and other types of flooring, as well as interior architectural coatings.  Recommended for use on nearly all substrates  DoradoStrip 3032 contains no TAP's or Hap's, offers easy cleanup with soap and water or denatured alcohol.

DoradoStrip 3032 offers you the same usability in all performance measures as similar paint stripping products albeit at a lower cost.  DoradoStrip 3032  is a quality replacement for most expensive chemical paint removers and is designed for use on substrates including steel, aluminum, concrete, masonry, wood, (lead based paints) or in any area where worker safety or damage to delicate equipment may be of concern.

Due to its thinner consistency of spray machine application the manufacturer suggests methods other than brushing due to the inherit realization that these methods may produce lower film builds and inconsistent product thickness.  This may lead to product performance under optimum ability.  You should always sample the product and prepare a test area to determine suitability for your intended project and application method.  This not only helps save you money but enhances your experience with the product and helps you gain valuable insight into dwell times, performance and suitability.


DoradoStrip 3032
Industrial Paint remover

Features and benefits:

bullet Water Based, Non Flammable
bullet Does not affect glass.
bullet Contains No Toxic or Hazardous Air Pollutants.
bullet Easy clean up with soap & water or denatured alcohol.
bullet Non-ozone depleting with Low odor.
bullet Easily sprayed with standard equipment.

Recommended Usage Information:

bullet Area of low ventilation areas or occupied areas.
bullet Wax and urethane coatings from waxed vinyl flooring.
bullet Removal of architectural coatings from walls and ceilings from building interiors.
bullet Uncured floor coatings.

to purchase DoradoStrip products click here


You may want to read our recent BLOG posting about GlossTek Coating.

DoradoStrip 3032 - Performance Information

Our test board consisted of:

1 layer Rust-Oleum spray (yellow)
2 layers ordinary latex (navy blue)
2 layers ordinary latex (red)
2 layers oil-based Rust-Oleum (pink)
2 layers Benjamin Moore (white dove)
2 layers Amer Tradition Wall & Trim (tan)
2 layers Amer Tradition Acrylic HP (orange)
2 layers Olympic Ext Latex Satin (brown)
2 layers Olympic Ext Latex Flat (green)
2 layers Living Color Krylon (elderberry)
1 layer Benjamin Moore (white dove)

Total painted  layers = 20


Our test board has 20 painted layers ...

We applied DoradoStrip 3032 to our test board in a temperature controlled environment of 70 degrees.  For application we used a 2.5in Chip Brush (this does not follow the manufacturers recommended application method).  We made sure to put on a heavy even coat, kind of like the a pop tart coating.  The product was very thin and had the same consistency of Elmer's Glue.  It had a floral/fruity odor in the pail and was yellow in color.

... at 24 hours we couldn't speak.  We were too busy wondering what this product had been up to  ...

Apparently DoradoStrip 3032 had been up to a lot as it had already begun to lift on its own. As you can easily see the paint is popping up in sections.  Too bad we can't offer you a topographical view.  It's even more amazing in person.  Although we waited 24 hours we felt that the same (visual results) were present after 12 hours.  We waited 24 hours soley because that the way we do it ...


... finally we get to take the paint off!

We used the ProGrip2 putty knife to easily remove 15 of the 20 painted layers. The White softened layer didn't give us much trouble but the red layer was not willing to budge at all!  This was almost the same result we got in our DoradoStrip 3031 test, although we did feel the 3031 was still slightly wetter, making it easier to remove.  We assumed lesser results since we did not follow the manufacturers recommendation for application method.  In harsher environments (wind, rain, temperature or high humidity) you will need to check removal times more closely.  Obviously we could have removed the product after just 12 hours with similiar results.

DoradoStrip 3032 offers you a cost effective stripping solution

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a property fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to In Canada contact a regional Health Canada office. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation. DoradoStrip 3032 is not approved for Aviation Use.

DoradoStrip 3032 Architectural / Janitorial paint remover

page bottom
home privacy notice | return policy | orders & shipping | sitemap | terms-conditions

DTEP Archival Record
 109 S Wayne Ave  •  Lockland OH  •  45215

Product names contained on this site are for identification purposes only.
All trademarks and registered marks are the property of their respective owners.

 Visit our StoreFront>

Copyright © 2002 - 2016 Small's Hardware Inc.  All rights reserved.