| Krud
Kutter House Wash removes tough
mold and mildew stains from home exteriors without bleach or ammonia. |
|
A MAJOR BREAKTHROUGH IN
HOUSE WASH TECHNOLOGY. The proprietary
formulation of KRUD KUTTER HouseWash contains Sporex, a unique additive
which removes tough stains from mildew, mold, algae, fungus and moss and
leaves the surface completely clean. In addition, special surfactants
penetrate the surface to safely and easily dissolve the toughest stains
from dirt, oil, grease, bird droppings, tree sap, and acid rain.
It even removes gray wood weathering, chalking and oxidation.
COST EFFECTIVE & EASY TO USE. When mixed with water, one
gallon of concentrate will clean approximately 4,000 square feet,
less on rougher surfaces, and can be
applied by pressure washer, pump up sprayer, brush or roller. Simply
apply to the surface, leave for 5 to 10 minutes, and wash off.
Has anti-corrosive agents to safeguard
pressure washer parts (bleach can erode O-rings).
|
|
32oz House Wash
w/ attachment for hose
removes tough stains from
mold and mildew from the exterior of your home without bleach or
ammonia.
|
|
product safely removes
|
 |
 |
Mildew
|
|
|
Mold
|
|
|
Algae
|
|
|
Fungus
|
|
|
Moss
|
|
|
and works on these surfaces
|
|
|
|
|
Exterior Siding (wood, vinyl,
aluminum)
|
|
|
Roofing
|
|
|
Gutters
|
|
|
Wood fences & decks
|
|
|
Stucco
|
|
|
Brick
|
|
|
Cement Block
|
|
|
Masonry
|
|
|
Concrete Driveways
|
|
|
Walkways
|
|
|
Walls
|
|
|
RV's
|
|
|
Patio Furniture
|
|
|
|
|
Frequently Asked Questions - answered!
|
|
Important information
on product use
|
|
|
From the garden
hose, rinse any nearby plants with clear water.
|
|
|
Always test on an
inconspicuous area first.
|
|
|
For best results
when cleaning decks, apply by pump-up garden sprayer, leave for 5 to
10 minutes, and rinse off with water.
|
|
|
On extremely soiled
or mildewed surfaces it may be necessary to scrub with a bristle
brush and a second application may be needed. Mildew may not be
completely removed from porous surfaces.
|
|
|
|
Any overspray can
be neutralized with large volumes of water.
|
|
|
For heavy oil and
grease stains (such-as on driveways and garage floors), pour product
directly onto the stain. Allow to penetrate for 10 minutes, then
follow normal application procedures.
|
|
|
In case of severe
oil and grease stains on porous surfaces, oil may bleed to the
surface
or leave-a residual stain. Repeat applications may lighten stains,
but may not remove them completely.
|
|
|
Contains no bleach or ammonia
making this product safer for people, pets & plants. |
|
Directions for Pressure Wash Application
|
 |
Rinse plants and surrounding
vegetation with water before and after application.
|
|
|
Place detergent application
siphon tube and screen filter directly into container. Open meter
valve (if applicable) for maximum product flow. For reservoir
machines, pour product (full strength) into pressure washer.
|
|
|
Spray at low pressure onto a dry
surface.
|
|
|
On vertical surfaces, always
spray from the bottom up.
|
|
|
Allow product to remain on the
surface for 5 to 10 minutes to penetrate. Do not allow product to
dry on surface.
|
|
|
Remove siphon tube from solution
and rinse surface with high pressure spray thoroughly.
|
|
|
Flush siphon tube with clean
water prior to storage.
|
|
|
