Strip paint with
Ready Strip Pro paint
remover professional strength.
Its the safe to use
varnish and paint remover that features Color Changing technology to
help you strip paint surfaces more efficiently.
|
| |
Ready Strip Pro paint
remover professional strength is a unique, environmentally friendly
varnish and paint remover capable of removing up to ten paint layers in
one application. The revolutionary "Color Change" feature signals the
time for paint removal. The remover is applied to the surface and turns
off-white when the paint or varnish is ready to be removed. Ready Strip
Pro paint remover professional strength is biodegradable, non-flammable,
virtually odorless and can be cleaned up with water. It contains no
methylene chloride, caustic, harsh chemicals or harmful vapors like many
conventional removers. Ready Strip Pro paint remover professional
strength avoids the uncertainty associated with other removers that are
ineffective if removed too soon, or dry out and not work if left on too
long. Ready Strip Pro paint remover professional strength not only
eliminates the guesswork and is safer to use, but will strip 5-10 times
more paint than conventional liquid paint removers. Unlike other
removers, Ready Strip Pro paint remover professional strength is a
semi-paste and therefore truly clings to vertical surfaces.
|
|
|
|
Preparation |
 |
Mask any areas not being
stripped with plastic and masking tape.
|
|
|
If product freezes in
bucket, let thaw and stir vigorously until product is
consistent.
|
|
|
Hints |
|
If Ready Strip Pro paint
remover professional strength safer paint remover is applied too
thinly, left on too long, or due to excessive heat conditions
the applied area is difficult to scrape, try the following:
|
|
|
Mist the applied area with
After Strip, wait 5-15 minutes and remove.
|
|
|
Reapply Ready Strip Pro
paint remover professional strength over itself, wait 15 to
30 minutes and remove.
|
|
|
If neither choice above
works, scrape off product and reapply.
|
|
|
|
 Ready
Strip Wash paint remover clean-up is the manufacturers
recommended product for removing residue and softened layers
that often remain after the paint stripping or varnish removal
process. It cleans and prepares the surface for refinishing.
This environmentally safe solution contains no methylene
chloride or harsh chemicals, is non-flammable, non-combustible
and biodegradable.
|
|
Since it is often
hard to know the type or amount of paint or varnish on a
surface, a small test area should be tested first to determine
whether the desired results will be achieved.
(read instructions)
|
|
|
|
Ready Strip Pro - Performance
Information
|
|
Our test
boards had 15 painted layers.
|
What's on
the boards?
2 layers latex primer (white)
2 layers oil base Rust Oleum (pink)
2 layers latex (blue)
2 layers latex (yellow)
1 layer latex Krylon (purple)
2 layers oil base Rust Oleum (pink)
2 layers latex (dark blue)
2 layers latex (white)
Observations during use:
We applied Ready Strip Pro to our test board in a temperature controlled
environment. The product had a very spreadable consistency with little
to no odor. After 24 hours visible lifting could be observed. Our sample
board was sprayed with Ready Strip Wash paint remover cleanup about one
hour ahead of paint removal to reactivate the product.
Recommendations for Ready Strip Pro:
Lifting with the Dura-Soft tool was generally easy barring the tackiness
of the underneath layers. We did not try to scrape off extra coatings
but could have easily done so. Eight layers were removed pretty easily
and we were quite happy with those results. Ready Strip Pro is a step up
from the Ready Strip Plus product and readily worth the extra $6 charge.
Its semi-firm consistency should still do well on most vertical
surfaces.
|
| |
|
|
| |
Apply Ready Strip Pro paint remover
professional strength liberally to the surface with a brush, medium
sized nap paint roller, or putty knife so that the remover completely
"masks" or covers the color of the surface to be stripped.
Do not attempt to brush out too thin like a coat of paint. It
covers approximately 50 sq. ft. per gallon. Apply at temperatures
between 60° F and 80° F. When the remover turns off-white it may form an
eggshell like skin to lock in the stripping action. Misting the area to
be removed with After-Strip paint remover wash prior to actual removal
will soften the skin and make lifting of the paint or varnish easier.
After the remover has turned off-white use a stiff putty knife to lift
paint from flat surfaces or a stiff bristle brush for detailed areas.
After initial lifting, use a nylon bristle brush or stripping pad to
scrub surface. The time the remover takes to turn off-white may vary
depending upon the type and amount of paint, the surface and
temperature. Typical color change usually occurs within 4 - 24
hours. Paint or varnish removal may take place prior to the Color
Change, although the
Color Change will indicate the end of stripping action. Apply Ready
Strip Wash paint remover clean-up for final clean up of residue. Surface
should be completely dry before repainting. No need to neutralize (acid
wash) surface. Clean tools promptly after use with soap and water.
|
|
 |
Friendlier for you ●
Friendlier for your Environment |
|
| |
|
|
| |
The softened paint/varnish may remain
moist under the eggshell skin for several days for easy removal.
However, on exterior surfaces, due to the potential for higher
temperatures and direct sunlight, the paint should be removed shortly
after "Color Change' to prevent the remover from drying out.
|
Rubber gloves and safety glasses are
recommended. Avoid eye contact. If eye contact occurs immediately flush
with plenty of water for 15 minutes. Avoid prolonged and repeated
contact with skin. If skin contact occurs, wash with soap and water.
Maintain adequate ventilation especially in confined areas. If spraying
is expected use NIOSH approved chemical cartridge (organic vapor)
respirators. If swallowed do not induce vomiting. Give 1 or 2 glasses of
water and call a physician immediately.
|
| |
|
to purchase
paint remover or accessories
click
here
|
| Strip paint with
Ready Strip Pro paint
remover professional strength. Its
the safe to use varnish and paint remover that features Color Changing
technology to help you strip paint surfaces more efficiently. |
|
