|
Ready-Strip
Pro™ - indoor or
outside (out of direct sun)
Use Ready-Strip Pro to safely remove up to seven layers of paint & varnish.
It removes most household varieties of latex paint, oil based paint,
enamels, alkyds, lacquers, clear coats, and polyurethanes. Use a
combination of Ready-Strip and After-Strip to remove stain. Ready-Strip
is self–teaching. For those unfamiliar with paint or varnish removal,
Ready-Strip "Changes Color" to signal the time for removal. The green
remover is applied to the surface and turns off-white when the paint or
varnish is READY to be removed. Use Ready Strip Wash paint remover
clean-up to remove residue and for clean up.
Multi-Strip™ - use indoor or outside.
Use Multi-Strip to safely remove up to fifteen layers of paint and
varnish. It can remove most varieties of oil or water-based paint
including latex, alkyds, enamels, stain, lead, lacquers and clear
paints. It can also remove more difficult coatings such as two-part
epoxies, urethanes and mastics. It can be applied by brush, roller or
standard airless paint sprayer. It can be scraped off or power-washed
off.
(HINT- when power-washing, lay landscape fabric along the base of the
building. It will catch the paint chips and allow the water to flow
through). Power washing off lead paint may require special precautions.
Use Lead Clean dust cleaner and paint deglosser to remove residue and
for clean up. See Technical Data for specific information.
|
Ultra-Strip™
Ultra-Strip has all the advantages of Tough2-Strip, but takes it a step
further. Ultra-Strip is even faster than Tough2-Strip. Ultra-Strip can
remove even more difficult coatings than Tough2-Strip. Use Ready Strip
Wash paint remover clean-up to remove residue and for clean up. See
Technical Data for specific information.
Strip-Tox™
Project: For removal of Lead-based paints. Strip-Tox is a safe lead
paint remover that performs similarly to Tough2-Strip on multiple layers
of paint, but had the added advantage of rendering the lead paint waste
non-hazardous for disposal purposes. Use Lead Clean dust cleaner and
paint deglosser to remove residue and for clean up. See Technical Data
for specific information.
Aqua-Strip™
A technically advanced, safer marine stripper designed to remove ten
layers of marine anti-fouling, top-side and other paints and varnishes
in one application. Aqua-Strip will not damage the gel coat, fiberglass
or any surface. Aqua-Strip stays wet for extended periods of time to
penetrate and lift bottom layers. It is environmentally safe,
biodegradable, non-flammable, and contains no methylene chloride or
caustic. It requires no neutralization (neutral pH).
|
