SAMAN® water based wood stains.  From traditional simple woods to elaborate and vivid colors of red, blue and green.  Saman water based wood stains, you've never seen anything like this!

 

Saman water based wood stains offer you a new generation in performance. With no danger to the user or the environment, these inflammable, super concentrated, easy to use wood stains do not require any pre-staining or conditioner. Additionally SAMAN Water based wood stains won’t cause raising of wood grain and can help reduce signs of brush overlap. It’s the synergy and benefit of oil base products from a water based stain.  Available in 27 standard colors.

 
 

Click to view standard colors and more!

Product Highlights
right arrow Needs just one coat and does not require a conditioner.
right arrow Ready to use right out of the bottle.
right arrow Palette includes 27 rich standard colors and 128 ready mixes using two color combinations.  Simple enough to mix at home.
right arrow Exceptional coverage; 12 oz covers up to 75 sq. ft; 8 oz. covers up to 50 sq. ft; 4 oz. covers up to 25 sq. ft. Roughly one dresser with 3 drawers and a mirror.
right arrow Water based, non-flammable, odorless and safe for the user and the environment.
right arrow Product can be inter-mixed to produce other colors or varied shades.
right arrow Does not leave any overlapping marks or raise the grain of wood.  Easy water clean up.

 

About Saman water based wood stains.

SAMAN’s introduction of a revolutionary water based wood stain was first launched in the Canadian marketplace in 1998. The product quickly became entrenched in the Canadian wood stain DIY market. With ever changing environmental laws here in the US, it was only natural that SAMAN water based wood stains would transverse the border to find a new home and marketing opportunity.

SAMAN water based wood stains are the easy to use, easy to work product that was designed for you! Color choices are limited only by your imagination. Because of the unique formulation it is possible to mix several colors and obtain an infinite number of shades as you would with watercolor paints.

Saman stains are an environmentally friendly product.

 

Basic Application Methods & Tips

Surface Preparation:
The surface must be clean, dry and free of all dirt.  If necessary, sand with fine abrasive paper (120-150 grit) to get a smooth finish and remove excess material with a compressed air duster or tack cloth.

Application:
Very simply pour a small quantity of stain onto a sponge (use the included sponge inside the Saman staining kit 60-002), or purchase a comparable sponge or foam brush.  Always working with the grain of the wood.  Wipe up any excess of stain using a lint free cloth.  We suggest the SuperWiper lint free cotton cloth.

Sealing & Protecting:
Apply two coats of Saman water-based clear finish to the surface area.

Saman & Saman Tradition fan decks.
click to view colors

Saman project tips!Soft wood - Apply one coat of Saman stain directly to wood, using no conditioner. One of Samans best characteristics is that it will not leave any overlapping marks.

Stain applied to dark - Sand with finer paper (grit 150 or 220). Apply a second coat and wipe thoroughly.

Darken applied color -  Apply a second coat and wipe thoroughly.

Dry-to-touch time: Allow 30 minutes to 1 hour for drying.  The dry times will vary with temperature and humidity. Drying times at 70?F.

Note:  To seal and protect your work, use Saman's clear finish, satin or semi-gloss.  Wash tools with water and light soap.


SAMAN® water based wood stains. Treat your wood surfaces with only the greatest of respect.



page bottom
homeprivacy

DTEP Archival Record
 109 S Wayne Ave  •  Lockland OH  •  45215

Product names contained on this site are for identification purposes only.
All trademarks and registered marks are the property of their respective owners.


 Visit our StoreFront

Copyright © 2002 - 2016 Small's Hardware Inc.  All rights reserved.